Skip to main content
UMP EDGE HEADER

UMP Receives RM157,800 from UMW Toyota Motor

UMP_Toyota Motor

Universiti Malaysia Pahang (UMP) received RM157,800 from UMW Toyota Motor through UMP Foundation for the Ninja Project@UMP STEM Lab that will commence this April, involving more than 1,000 school students nationwide. 
 
The current rapid development of information and technology requires the students to be knowledgeable and skilful, particularly in areas related to science, technology, engineering and mathematics (STEM), and master the 21st-century skills such as communication, problem-solving and critical and creative thinking.
 
According to the Deputy Vice-Chancellor (Student Affairs & Alumni), Professor Dato’ Dr. Yuserrie Zainuddin, who is also the Deputy Chairman of UMP Foundation, it is UMP’s priority to help improve the community well being and socioeconomic through education and research, in line with the aspiration of UMP to realise the agenda of communitising technology for the benefits of the local community. 

“The collaboration between UMP and UMW Toyota Motor in Ninja Project@UMP STEM lab will attract students interest into STEM, especially in robotics and digital technology. 

“It also involves UMP students as facilitators, teachers and lecturers in empowering STEM,” he said in his speech at the Cheque Presentation Ceremony from Toyota Classic UMW Toyota Motor to UMP in conjunction with the kick-off of Ninja Project@UMP STEM Lab at the Banquet Hall, Chancellery, UMP Pekan on 7 January 2019. 
 
Speaking about UMP Foundation, he added that since January 2020, MyGift UMP was rebranded to MyGift UMP Foundation, also known as UMP Foundation, to collect and manage funds from the public, companies and institutions for the welfare of UMP students. 

“It includes funding for educational and community programmes and provides learning facilities for UMP students. 

“By 2025, UMP Foundation targets to support 7,000 UMP students from families in the B40 group and excellent students to pursue their studies in this university,” he said. 
 
The President of UMW Toyota Motor, Ravindran K, presented the mock cheque, with the presence of the Director of Marketing Division, Mohd. Shamsor Mohd. Zain and the General Manager of Marketing Division, Richi Lim. 

Also in attendance were the Deputy Vice-Chancellor (Academic & International), Professor Ts. Dr. Mohd Rosli Hainin and the Director of Industry and Community Network Centre (ICoN), Associate Professor Ir. Dr. Nurul Hazlina Noordin.
 
Meanwhile, Ravindran said that the collaboration with the Ministry of Education in Eco Youth Program since 2001 involving 2,000 students from 300 schools have been successful in organising environmental awareness programmes.

 “Toyota Dream Art Contest which was introduced seven years ago, managed to inspire 9,000 students to share their creative ideas through future car drawings.
 
“Toyota, as the sponsorship partner, also introduced a new initiative Toyota Outrun in conjunction with Tokyo Olympics and Paralympics 2020, which raised RM150,000, to be donated to Paralympic Council of Malaysia.
 
“Through the organisation of the Toyota Classic Concert, we managed to raise a total of RM9.4 million from companies and ticket sales since 1990, which has benefited more than 72 organisations related to environmental care and young people of this country. 

“Beside UMP, Sabah Wetland Conservation Society Malaysia also received a donation from UMW Toyota Motor,” he said.

*credit to Pekan Review


PhyMill is Created to Aid Therapists and Paediatric Patients to Undergo Physiotherapy Treatment

PhvMill_Therapist

The sympathy towards children who face difficulties in controlling their bodies’ position and activation due to damage to their developing brain, or better known as cerebral palsy, inspired a group of Universiti Malaysia Pahang (UMP) researchers to develop the Smart Physio-Treadmill (PhyMill) to aid patients in training their walking movements.
 
According to the project leader, who is also a lecturer at the Faculty of Mechanical and Automotive Engineering Technology, UMP, Ts. Dr. Mohd Azrul Hisham Mohd Adib, PhyMill is an automatic exercise device to train walking movements for patients undergoing treatment.  

“PhyMill is also designed specially to help therapists rehabilitate patients during physiotherapy sessions, especially involving movement in the lower extremities or lower body parts.
 
“Until now, most rehab products require care and management by the therapists. 

“The existing rehab devices are also manual, with most of them obtained from overseas at incredibly high prices.
 
“The development of this product was achieved with help and advice from a physiotherapy expert in Kuantan Physical Therapy-Physiotherapy Centre, Narimah Daud.

“The fusion of ideas between physiotherapy experts and researchers greatly simplified the creation of PhyMill, allowing it to be more user-friendly and to fulfil the patients’ needs,” he said in the PhyMill handing-over ceremony for use by the centre on the 17 January 2020 in Kuantan.

He further added that its small size allows portability according to the patient’s needs and requirements.
 
“PhyMill has three modes of usage; the first mode can control the patient's movements walking forwards and backwards. 

“This movement is controlled fully automatically simply by pressing the allocated button. Speed control is also provided to enable the patient to adjust the speed according to the rehabilitation level specified by the therapist.
 
“Meanwhile, the second mode is the automatic height adjustment. PhyMill lets patients set the level of the handle according to their body height. 

“The third more is a special screen to catch the patients’ attention and to avoid boredom while undergoing a rehabilitation session. 
 
“PhyMill can also be used by children as young as 4–7 years old and can support up to 30 kg,” he said.

He hopes that this product can be a pioneer in the field of medical rehabilitation in Malaysia, aside from being an enabling device for therapists in reaching their goal towards ‘zero lifelong treatment’ for all patients.
 
As a researcher, there are plans to improve the current prototype, especially from an aesthetic and functional standpoint. 

“By adding a few more specialised functions such as remote control and illuminating the patient’s legs, we can let this product achieve specification towards patients’ active movement treatment.
 
“I also intend to commercialise this product to make it more accessible for paediatric physiotherapy experts in Malaysia. 
“However, cooperation from the industry or either government or private institutions is very much needed, especially hospitals and rehabilitation centres,” he said.
 
This product has received recognitions at research displays, winning a silver medal at the Creation, Innovation, Technology & Research Exposition (CITREX 2019) and also in the International Festival of Innovation in Green Technology (i-FINOG 2019).
 
PhyMill was developed fully by Tim Rehab under the Human Engineering Group (HEG) from the Faculty of Mechanical and Automotive Engineering Technology, assisted by Dr. Nurul Shahida Shalahim, Idris Mat Sahat, Dr. Zakri Ghazalli, Dr. Muhammad Hilmi Jalil, and graduates under the Integrated Design Project (IDP), namely Afiq Ikmal Zahir, Ahmad Hijran Nasaruddin, Muhammad Shazzuan Sharudin, and Muhammad Rais Rahim.

*credit to Pekan Review


AGRISOFT to Boost Production for Farmers and Breeders

Agrisoft_Farmers_Breeders

Concern with problems often faced by farmers or breeders in monitoring and regulating their crops or livestock has motivated a Universiti Malaysia Pahang (UMP) researcher to come up with a system called IoT-Enabled Farmer Digital Expert System @ AGRISOFT.

The system is developed to help overcome losses due to damages in crops or livestock caused by ecological changes which have not been observed earlier.

According to Lead Researcher and Director of Industrial Centre of Excellence (ICoE) for Electrical and Electronic Cluster, Associate Professor Ir. Ts. Dr. Fahmi Samsuri, he came up with the idea after seeing most farmers and breeders in Malaysia still relied on the conventional system, the labour-based system, when working on their land or breeding livestock.

“This can cause them to incur high losses unless the ecological factors can be identified sooner with preventive and corrective actions be taken faster, thus saving their yields and harvests which can be sold to customers.

“By using modern technology, it can help increase their production and reduce dependency on manual labour.

“For example, in Europe and the USA, modern technology have been used in the agriculture and livestock industries and resulted in them being among the world’s biggest crop and aquaculture producers,” he said.

On AGRISOFT, Professor Ir. Ts. Dr. Fahmi explained that readings related to the ecological elements such as temperature, humidity, pH level of the soil or water, oxygen concentration, the murkiness of the water, electrical conductivity of the water and also the potential level of oxidation in soil or water could be obtained from sensors installed in the system.

“After the readings are obtained, the system will record the data and make recommendations on the necessary actions to be taken in order to overcome problems arising from changes that occur in the parameters.

“For example, the suitable pH range for planting crops is between pH level 6 and 8, and the reading showed a surge higher that the suitable range.

“The system will then send the information to the user through telephone with suggestions on the right measures to be taken such as reducing the pH level to the precise level by increasing fertilisers containing sulphur, iron and aluminium into the soil,” he said.

He added that the system demonstrated the most suitable way in assisting farmers or breeders to grow vegetables or commodity crops such as oil palm trees and modern crops planted using the hydroponic method.

It was also suitable for rearing fish or prawns in cages, he said.

“The system operates by collecting data from sensors placed around the area where crops are planted or where the cages are placed. Readings can be taken by the minute or on hourly and daily basis, depending on the condition or needs of the crops or livestock.

“If something happens, the sensor will detect the changes and send a warning signal to the main control system. All these can be linked either by wired or wireless broadband connections.

“The main control computer system will then process the information, send messages and recommend actions to be taken via short messaging system or SMS in mobile phones.

“All the communications are made through the Internet and this will allow the user to get notifications from anywhere and at any time,” he said.

Professor Ir. Ts. Dr. Fahmi also said research on the system began in 2015 and was developed in stages with the first stage commenced the following year while the second stage was completed in 2019.

“Works are now being conducted to complete the third stage of the research,” he added.

Professor Ir. Ts. Dr. Fahmi said he planned to develop a holistic system that combined wireless Internet technology with the iCloud database system.

The third level of the research involves developing an online application system (mobile apps) and users can have access and control of their crops or livestock by using the mobile apps installed in their mobile phones.

All the data and information are stored in the iCloud database which is accessible from any location and at any time. All processes can be managed and controlled at the touch at the fingertips.

The Perak-born researcher planned to expand the system in other industries such as in rearing of dairy animals (cattle, goats) and bird nest farming.

He hoped that the system could be developed to help small-time farmers and breeders to optimise their production at a lower cost by using modern technology.

Professor Ir. Ts. Dr. Fahmi also expressed his gratitude for the cooperation and support from UMP-Community Technology Solution Platform Evaluation Fund/Lab2Market Seed Fund for the research grant he received amounting to RM80,000.

For those who are interested in having the system, a complete set cost between RM1,500 to RM3,000 - depending on the model, the type and the number of sensors required.

AGRISOFT has won medals and received credits in various national and international conferences and expositions including a gold medal at the Creation, Innovation, Technology and Research Exposition (CITREX) in 2016 and 2019, a gold medal and a CARIFF Special Award at the Citrex 2016, a silver medal at the Institute of Higher Learning Invention Expo and Conference (PECIPTA) 2019 and a silver medal at the International Invention, Innovation and Technology Exhibition (ITEX 2019).

*credit to Pekan Review


Strategic Collaboration Between UMP and Agrico for Agricultural Development Qatar in Agricultural Product Development

Strategic Collaboration UMP_Agro

Universiti Malaysia Pahang (UMP) has ratified strategic cooperative ties with Agrico for Agricultural Development, Qatar (Agrico) which is a supplier for agricultural systems and greenhouse-grown produce in Doha, Qatar on January 20, 2020 in Kuala Lumpur. 

UMP will work together with Agrico in research, product development, commercialisation, and expertise exchange for use in agriculture which will be utilised in Agrico’s greenhouses in Doha, Qatar.

Signing the Memorandum of Understanding (MoU) were the Vice-Chancellor of UMP, Professor Ir. Dr. Wan Azhar Wan Yusoff and Chairman of International Project Development, Agrico Agricultural Development, Qatar, Ahmed Hussain Al-Khalaf, witnessed by the Chairman of the Board of Directors of UMP, Dato’ Sri Ibrahim Ahmad, Ambassador of Qatar in Malaysia, H.E Fahad Mohammed Kafoud, The Director General National Centre for Governance, Integrity  & Anti-Corruption, Prime Minister’s Department, Tan Sri Abu Kassim Mohamed and Cameron Highlands District Officer, Dato' Ishak Md. Napis.   

According to Professor Ir. Dr. Wan Azhar, UMP welcomes this strategic cooperation with Agrico and hopes that this cooperation can benefit UMP in sharing expertise to meet industry needs in the future, not only within the country but also at an international level. 

“This cooperative bond will certainly elevate UMP’s credibility in leading high-level Technical and Vocational Education and Training (TVET) programmes.

“Besides the new formulation that will be developed, this collaboration will involve the exploration of new opportunities for the commercialisation of organic liquid fertiliser with prebiotics named Pre-Pecto, at a large scale. This product has been used by Agrico at a smaller scale, and the results have been outstanding.

“I am highly proud of the results and efforts which have been and currently are being achieved by UMP researchers, Dr. Noormazlinah Ahmad and Dr. Siti Hajar Noor Shaarani who are involved in this cooperation. 

“I hope for many more researchers at UMP will strive to explore further opportunities to cooperate with others on an international level, especially with Islamic countries worldwide,” he said.

Meanwhile, Ahmed Hussain Al-Khalaf said the joining efforts to bring about the first collaboration between the state of Qatar and Malaysia in the area of agricultural technology, with the hopes to establish a sustainable, consistent and quality production of food security for both Malaysia and Qatar. 

This initiative shall respond to the need to increase bilateral trade and investment cooperation between the two countries.

UMP is an established and competency-based technical university that specialises in the fields of engineering and technology and it strives to further enhance and strengthen its international linkage. 

The university has taken various initiatives to add to its educational excellence and has entered into various collaborative arrangements with respectable parties to enrich its academic and research activities.

*credit to Pekan Review


Iwate University Global Fellow Award Recognition for UMP

Fellow Award Recognition_UMP

The collaboration between Universiti Malaysia Pahang (UMP) and Iwate University (IU) Japan since 2009 via research, teaching and learning, cultural exchange and mobility programmes involving students and staff has benefited both sides.
 
To strengthen the bilateral relations of both institutions, IU has granted the Iwate University Global Fellow award to the late Professor Dato’ Dr. Mashitah Mohd Yusoff, from the Faculty of Industrial Sciences and Technology (FIST), who passed away on 24 January 2020. 

During her service at the university, she was trusted as the Deputy Vice-Chancellor (Research and Innovation), Assistant Vice-Chancellor (Corporate Affairs and Quality) and several management positions as well as contributed to the development of research and innovation especially in the field of chemical and bioprocess engineering.
 
The ceremony witnessed the Vice-Chancellor of UMP, Professor Ir. Dr. Wan Azhar Wan Yusoff received the award from the President of IU, Akira Iwabuchi, in conjunction with the official visit of IU delegates on 4 February 2020. 
 
According to Professor Ir. Dr. Wan Azhar, this recognition is meaningful for the university, and the entire university community was overwhelmed with the passing of the late Professor Dato’ Dr. Mashitah who contributed a lot to the development of research in this university.

“UMP as one of the technical universities in Malaysia is delighted with the recognition that contributes to the excellence in academics, research and innovation, as well as social relation,” he said.
 
Meanwhile, Akira Iwabuchi said that this award was granted as the recognition to the staff who have contributed to teaching and learning as well as being active in research at the international level. 

“This award should be presented at the Iwate University’s 70th Anniversary celebration in November 2019, but Professor Dato’ Dr. Mashitah was unavailable due to health problems,” he said.

He added that Professor Dato’ Dr. Mashitah is the 9th of 10 recipients ever awarded by IU.
Besides, he expects more opportunities for collaboration in the future from the close relationship between UMP and UI.
 
The close relationship is portrayed from the joint organisation of Asian Education and Research Consortium on Tool, Die & Mold Technology (2013) that involved UMP, Iwate University (Japan), Hanbat National University (South Korea) and Dalian University of Technology (China) to share expertise in the engineering field. 
 
Also present were the Deputy Vice-Chancellor (Research and Innovation), Professor Dr. Kamal Zuhairi Zamli, the Deputy Vice-Chancellor (Academic & International), Professor Ts. Dr. Mohd. Rosli Hainin and the Director of Centre for International Relations, Academic & International Affairs Department, Dr. Mohd Azmir Mohd. Azhari.  

*credit to Pekan Review

Click here for more edition


FOOTER